Advantech RS-485 Manual de usuario descargar pdf (Pagina 96)

100

101

5-4 ADAM-5000

Software Utilities

current values of its inputs. An example is shown in Figure 5-2 for an

ADAM-5000 system.

Figure 5-2 Setup options

There are three different options: System Setting, Module Setting and

Output Data.

Highlight the parameter you wish to change and press <Enter>. A

window will appear with the configuration options for that parameter.

Highlight the proper value and hit <Enter>. For some parameters, you

will need to type in a specific value after selecting the parameter.

System Setting

The Checksum and Baud rate options need special attention since

they can only be changed when an ADAM-5000 is in the INIT* state.

To place a system in INIT* state, its INIT terminal should be connect-

ed to its GND terminal. If the ADAM-5000 is not in INIT* mode, an

error message will appear. When it is in INIT* mode, a window to

change the Checksum or an option window showing you the valid

baud rates will appear, depending on your choice.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 347 348

Comentarios a estos manuales

Sin comentarios

Advantech RS-485 Manual de usuario Pagina 96

Comentarios a estos manuales

Relacionado con productos y manuales para Digital + i / s analógicas módulos Advantech RS-485