Advantech RS-485 Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
2-10 ADAM-5000
Installation Guideline
INIT* is used for changing baud rate and checksum. COM is provided
as reference to the RS-485 ground signal. DATA+ and DATA- are
provided for the RS-485 twisted pair connection.
Figure 2-7 ADAM-5000 Wiring and connections
I/O Modules Wiring
The system uses plug-in screw terminal blocks for the interface
between I/O module and field devices. The following information must
be considered when connecting electrical devices to I/O modules.
1. The terminal block accepts 0.5 mm
2
to 2.5 mm
2
wires
2. Always use a continuous length of wire, do not combine
wires to attain needed length
3. Use the shortest possible wire length
4. Use the wire trays for routing where possible
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 347 348

Comentarios a estos manuales

Sin comentarios