Advantech RS-485 Manual de usuario descargar pdf (Pagina 234)

100

101

6-112 ADAM-5000

Command Set

#aaSiBB(data) #aaSiBB(data)

sent to the digital output module (ADAM-5056) in slot 1

of the ADAM-5000 system at address 14h. Channels 2,

4, 5, 9 and 12 will be set to ON, and all other channels are

set to OFF.

command: #15S0003A(cr)

response: >(cr)

An output byte with value 3Ah (00111011) is sent to the

digital output module (ADAM-5060) in slot 0 of the

ADAM-5000 system at address 15h. Channels 0, 1, 3, 4

and 5 will be set to ON while channel 2 is set to OFF.

Bits 6 and 7 are not used and always default to 0.

Note: If any channel of the digital output module is config-

ured as the output for an analog input alarm, it

cannot be reconfigured via digital output commands.

Channels used for analog input alarms always have a

higher priority.

5050/5051/5052/5056/

5060/5068 Digital I/O

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 347 348

Comentarios a estos manuales

Sin comentarios

Advantech RS-485 Manual de usuario Pagina 234

Comentarios a estos manuales

Relacionado con productos y manuales para Digital + i / s analógicas módulos Advantech RS-485