Advantech RS-485 Manual de usuario descargar pdf (Pagina 151)

100

101

ADAM-5000 6-29

Chapter 6

$aaSiER $aaSiER

Name Initialize EEPROM Data

Description Initializes all EEPROM data in a specified analog input

module to their default values. This command is sent

following a failed attempt to calibrate a module (the

module shows no effect from an attempted calibration).

Following initialization, the problem module should

readily accept calibration.

Syntax $aaSiER(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system.

Si identifies the I/O slot in which you wish to initialize all

EEPROM data.

ER represents the initialize EEPROM data command.

(cr) is the terminating character, carriage return (0Dh)

Response !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

? delimiter character indicating the command was

invalid.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh)

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 347 348

Comentarios a estos manuales

Sin comentarios

Advantech RS-485 Manual de usuario Pagina 151

Comentarios a estos manuales

Relacionado con productos y manuales para Digital + i / s analógicas módulos Advantech RS-485