Advantech MIC-5332 Manual de usuario descargar pdf (Pagina 66)

<3.2> SOL session activation

Finally, the IPMItool “sol activate” command need to be issued to establish the

SOL session to MIC-5332 from remote.

To terminate an active IPMItool SOL session, please use the key sequence“~” +

“.” (tilde and dot).

Note: There can only be one Serial over LAN session active at once!

4.7 Dynamic Power Budgeting

When the shelf manager transits the FRU to the M4 state, it will perform power

budgeting based on current requirements stored in the FRU EEPROM. Instead of

# ipmitool -I lanplus <IP-Address> -U <User> -P <Password> sol activate

[SOL Session operational. Use ~? for help]

…

~. [terminated ipmitool]

# ipmitool -I lanplus <IP-Address> -U <User> -P <Password> sol set

SOL set parameters and values:

set-in-progress set-complete | set-in-progress |

commit-write

enabled true | false

force-encryption true | false

force-authentication true | false

privilege-level user | operator | admin | oem

character-accumulate-level <in 5 ms increments>

character-send-threshold N

retry-count N

retry-interval <in 10 ms increments>

non-volatile-bit-rate serial | 9.6 | 19.2 | 38.4 | 57.6 | 115.2

volatile-bit-rate serial | 9.6 | 19.2 | 38.4 | 57.6 | 115.2

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 128 129

Sin comentarios

Advantech MIC-5332 Manual de usuario Pagina 66