Advantech MIC-5332 Manual de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 129
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
A.3 Read Port 80 (BIOS POST Code) OEM command
To be able to read out the actual BIOS boot state via IPMI, the MMC provides an
Advantech OEM command to reflect the actual BIOS POST (Port 80) code.
Response:
A.4 Load NVRAM defaults OEM command
The BMC implements an OEM command to be able to load the NVRAM defaults from
SW side without the need of extracting the blade and performing any jumper plug and
re-plug.
Response:
A.5 MAC Address Mirroring OEM command
The blade LAN Controller MAC addresses will also be stored in the FRU EEPROM,
making the MAC’s available even if the payload is not powered.
The MIC-5332 board is equipped with 7 MAC addresses in total. Please find below
the used order in the FRU EEPROM Internal Use Area:
MAC Number LAN Interface
0 Fabric interface 1
1 Fabric interface 2
2 Base Interface 1
3 Base Interface 2
4 IO Interface 1
5 IO Interface 2
39 28 00
ipmitool raw 0x2e 0x81 0x39 0x28 0x00
39 28 00 <POST Code>
ipmitool raw 0x2e 0x80 0x39 0x28 0x00
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 128 129

Comentarios a estos manuales

Sin comentarios