Advantech MIC-5332 Manual de usuario descargar pdf (Pagina 33)

3.3.3 PuTTY Configuration

Assuming both the CP2102 driver and PuTTY have been installed successfully on the

terminal PC with Microsoft Windows, the user can check the COM port (UART)

number under “COM and LPT” in the “Device Manager”, which can be accessed by

entering the “Control Panel” followed by opening up “System” and then “Hardware”.

Let us assume the CP210x USB to UART Bridge Controller has been assigned with

“COM12”, you can open up PuTTY and begin the configuration as shown below. If

you use the RJ45 (COM1) and a serial port on the terminal PC, please use the COM

port number of that serial port instead of “COM12”.

 Specify COM12 under serial line and 115200 for speed, no parity, no flow

control.

 Check Serial for connection type.

 Click the “Open” button and a PuTTY terminal screen will appear.

Figure 3.3a PuTTY Configuration

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 128 129

Sin comentarios

Advantech MIC-5332 Manual de usuario Pagina 33