Advantech 5000 Series Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Installation Guideline
INIT* is used for changing baud rate and checksum. COM is provided
as reference to the RS-485 ground signal. DATA+ and DATA- are
provided for the RS-485 twisted pair connection.
Figure 2-7 ADAM-5000 Wiring Connections
I/O Module Wiring
The system uses plug-in screw terminal blocks for the interface
between I/O module and field devices. The following information
must be considered when connecting electrical devices to I/O modules.
1. The terminal block accepts 0.5 mm
2
to 2.5 mm
2
wires
2. Always use a continuous length of wire, do not combine wires to
attain needed length
3. Use the shortest possible wire length
4. Use the wire trays for routing where possible
2-10 ADAM-5000
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 300 301

Comentarios a estos manuales

Sin comentarios