Advantech 5000 Series Manual de usuario descargar pdf (Pagina 169)

100

101

Command Set

5024 Analog Output

$aaSiCj3hh

(cr) is the terminating character, carriage return (0Dh)

Example command: $07S1C2314(cr)

response: !07(cr)

The command tells channel 2 of the analog output

module in slot 1 of the ADAM-5000 system at address

07h to increase its output value by 20 (14h) counts

which is approximately 30 µA.

The analog output module confirms the increase.

Note:

In order to perform a

Trim Calibration, either a mA

meter or a resistor and voltmeter should be connect-

ed to the module's output prior to calibration. (See

also the 4 mA and 20 mA Calibration commands of

the analog output module's command set. Refer also

to Chapter 4, Section 4.5, Analog Output Calibration for

a detailed description.)

6-104 ADAM-5000

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 300 301

Comentarios a estos manuales

Sin comentarios

Advantech 5000 Series Manual de usuario Pagina 169

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Advantech 5000 Series