Advantech 5000 Series Manual de usuario descargar pdf (Pagina 128)

Chapter 6

$aaSiAFFff

Name Set Data Format

Description Sets the data format in engineering units or in two's

complement format for a specified analog input module

in a specified system.

Syntax $aaSiAFFff

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system you want to

configure.

Si identifies the I/O slot of the ADAM-5000 system

containing the ADAM-5017H module you want to

configure.

AFF represents the set data format command.

ff represents the 2-character hexadecimal code of the

data format. 00 is for engineering unit format. 02 is for

two’s complement format.

Note:

Each channel in an

ADAM-5017H / 5017UH

module

may be set to a different range, but the data formats

of all channels in this module must be the same.

(cr) is the terminating character, carriage return (0Dh).

Response !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

? delimiter character indicating the command was

ADAM-5000 6-63

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 300 301

Sin comentarios

Advantech 5000 Series Manual de usuario Pagina 128