Advantech 5000 Series Manual de usuario descargar pdf (Pagina 196)

Chapter 6

$aaSiØ(data)

Name Set Digital filter Scale

Description Set the filter seconds to start to measure the input signal.

Syntax $aaSiØ(data)(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system which is to be

calibrate.

Si identifies the sepcified slot.

Ø is the command for setting digital filter scale.

(data)

represents filter secends from 8µs~65000 µs. Be

aware that (data) has 5 characters.

(cr) is the terminating character, carriage return (0Dh)

Response !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exists.

! delimiter character indicating a valid command was

received.

? delimiter character indicating the command was

invalid.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-131

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 300 301

Sin comentarios

Advantech 5000 Series Manual de usuario Pagina 196