Advantech 5000 Series Manual de usuario Pagina 243

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 242
Quick Start Example
+
+Vs
-
GND
INIT*
COM
DATA+
DATA-
Figure A-3 Grounding the INIT* terminal
3. Wait at least 7 seconds to let self-calibration and ranging
takeef- fect.
4. Configure the baud rate and/or checksum status.
5. Switch the power to the ADAM-5000 system OFF.
6. Remove the grounding on the INIT* terminal and power the
ADAM-5000 system ON.
7. Wait at least 7 seconds to let self-calibration and ranging
takeef- fect.
8. Check the settings. (If the baud rate has changed, the settings
on the host computer should be changed accordingly)
A-10 ADAM-5000
Vista de pagina 242
1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 300 301

Comentarios a estos manuales

Sin comentarios