Advantech 5000 Series Manual de usuario Pagina 121

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 120
Command Set
5017/5018
Analog Input
$aaSi9shhhh
Example command: $07S29+0042(cr)
response: !07(cr)
The command increases the CJC offset value of the
analog input module in slot 2 of the system at address
07h with 66 counts (42 hex) which equals about 0.6°C.
Note:
An analog input module requires a maximum of 2
seconds to perform auto calibration and ranging after it
receives a CJC Calibration command. During this
interval, the module cannot be addressed to perform
any other actions.
6-56 ADAM-5000
Vista de pagina 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 300 301

Comentarios a estos manuales

Sin comentarios