Advantech SSPB-3000C Especificaciones descargar pdf (Pagina 37)

SSBP-3000C

Page 36

TABLE 11: RS-232 MENU ITEM DEFINITION

Item Description

S/N:

Serial Number of the SSPB unit (B2309, in this case)

Soft:

Version number of the software within the SSPB unit (1.0, in this case)

Unit Pos:

Indicates which path the SSPB is connected to in a 1:1 redundant system:

‘A’ or ‘B’. For a standalone unit, the display ‘N/A’ is indicated (for Not

Applicable)

Name: Name of the SSPB unit (200 C, in this case)

MAC:

M&C communication address for RS-485 interface (0x01, in this case)

Current:

Total current consumption from the +12 V DC power supply, in amperes

(030.4 A, in this case)

TxF shift:

Transmission Local Oscillator frequency in MHz (4900, in this case)

FPWR:

Forward (output) Power in dBm (21.0 dBm, in this case)

TxGain:

Transmission Gain in dB (62.0 dB, in this case)

Tx Stat:

Transmission Status (On, in this case; might be On-for RF On or Off- for

MUTE)

RPWR:

Reverse (reflected) Power in dBm (00.0 dBm, in this case – any value

below 20.0 dBm will be displayed as 0.00 dBm)

Temp HS: Hot Spot temperature in °C (+035.3 °C, in this case)

PS:

Power Supply voltage in volts (+012.1 V, in this case)

Alarms:

Provides the fault messages and the normal status message:

1. Alarm (excess +12 VDC current, faulty RF devices, power supply

failure, or L-Ku up-converter module failure).

2. Temperature shutdown (ambient temperature exceeds 85ºC).

3. OK (SSPB is functioning properly).

Tx WGSW:

Status of Transmission W/G Switch (N/C, in this case, for Not Connected)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

Sin comentarios

Advantech SSPB-3000C Especificaciones Pagina 37