Advantech SSPB-3000C Especificaciones descargar pdf (Pagina 23)

SSBP-3000C

Page 22

5. UNPACKING AND INSTALLATION

This Section contains instructions for the site preparation, unpacking and installation of the SSPB.

5.1 INITIAL INSPECTION

Inspect the shipping container for damage resulting from the shipment. If damaged, immediately

contact the carrier that delivered the equipment and submit a damage report. Failure to do so may

invalidate future claims.

5.2 UNPACKING

Carefully remove all of the items from the shipping container. Save all of the packing material

until completing successfully the visual inspection. Verify that all of the items listed on the

packing list (see TABLE 20 at page 46) have been received. If any of the items are missing,

immediately contact ADVANTECH. Inspect all of the items for evidence of damage resulting

from the shipment. If damage seems evident, immediately contact the carrier that delivered the

equipment and file a claim. Failure to do so may invalidate future claims. Check the unit

thoroughly for damaged or loose parts.

5.3 INSTALLATION

Installation of the SSPB requires the following four phases:

Environmental and adequate ventilation considerations

Mechanical installation

Electrical connections

RF connections

TABLE 6 at page 23 lists all connectors used by the SSPB unit and their corresponding mating

connectors. Figure 5 at page 24 shows the location of the connectors.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 54 55

Sin comentarios

Advantech SSPB-3000C Especificaciones Pagina 23