Advantech SSPB-3000C Especificaciones descargar pdf (Pagina 16)

SSBP-3000C

Page 15

TABLE 1: FRONT PANEL CONTROLS AND INDICATIONS

Control/display Function

ENTER

Select menu line, select item for modification or end of item’s

modification, save new value or return to previous item.

CLEAR Return to previous item without saving any value.

UP arrow Move to previous menu item or modify selected parameter.

DOWN arrow Move to next menu item or modify selected parameter.

LEFT arrow Select character left from the cursor for modification.

RIGHT arrow Select character right from the cursor for modification.

PWR ON LED

Blue LED. When lit, indicates that power is applied to the Main

Controller Board of the unit.

RF ON LED

Green LED. When lit, indicates that the unit is in RF ON (NOT MUTE)

state.

REMOTE

Green LED. When lit, indicates that the unit is in REMOTE

CONTROL (from PC) as opposed to LOCAL control (from its front

panel). This situation is not applicable for these units which do not

discriminate between LOCAL and REMOTE control. Consequently this

LED will be always dark.

MUTE LED

Yellow LED. When lit, indicates that the RF circuits are disabled and

no RF output power is delivered.

ALARM LED

Yellow LED. When lit, indicates a temperature ALARM situation: the

hot spot temperature of the unit is over 75 °C but under 80 °C. The unit

is still functional but with some degraded performance.

STATUS LEDs

FAULT LED

Red LED. When lit, indicates the failure of the unit. The unit is not

functional.

AUTO LED

Blue LED. When lit, indicates that the redundancy control is in AUTO

mode (if the ON-LINE unit failed, the switching of the STAND-BY unit

to the antenna is performed automatically).

ONLINE LED

Green LED. When lit, indicates that the unit is in ONLINE (switched to

the antenna) in the redundant configuration.

REDUNDANT LEDs

STBY LED

Yellow LED. When lit, indicates that the unit is in STAND-By

(switched to the dummy load) in the redundant configuration.

Vacuum Fluorescent

Display (VFD)

Displays 2 lines of 20 alphanumerical characters. The first line shows

the output power level of the SSPB and the gain. The second line shows

the selected menu type or the value of the selected parameter. Figure 6

at page 33 shows all of the menus used by the SSPB.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Comentarios a estos manuales

Sin comentarios

Advantech SSPB-3000C Especificaciones Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para No Advantech SSPB-3000C