Advantech Data Acquisition Modules ADAM 4000 Manual de usuario descargar pdf (Pagina 259)

100

101

Digital I/O and Relay Output

Counter/Frequency Command Set

ADAM 4000 Series User’s Manual

$AAP

Name Read the Low Power Status of Module command

Description The command requests the module at address AA to return

the low power status of module

Syntax $AAP(cr)

$ is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address that you will access to.

P is the Read the Low Power Status of Module command.

(cr) is the terminating character, carriage return (ODh).

Response !AAS(cr) if the command was valid.

?AA(cr) if an invalid command has been issued.

There is no response if the module detects a syntax or

communication error, or even if the specified address does

not exist.

! is a delimiter character which indicates a valid command

? is a

delimiter character which indicates an invalid command

AA (range 00-FF) represents the calibrated 2-character

hexadecimal address of the module.

S represents the Status bit from the low power status. When

the logic equals to 1, it represents low power. When it equals

to zero, it means normal.

(cr) is the terminating character, carriage return (0Dh).

4069

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 428 429

Comentarios a estos manuales

Sin comentarios

Advantech Data Acquisition Modules ADAM 4000 Manual de usuario Pagina 259

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Advantech Data Acquisition Modules ADAM 4000