Advantech Data Acquisition Modules ADAM 4000 Manual de usuario descargar pdf (Pagina 210)

100

101

5-64

ADAM 4000 Series User’s Manual

4016

$AAS

Name Start-up Voltage Output Configuration command

Description Stores the present analog output value of the strain gauge

input module with address AA in the module’s non-volatile

after a brownout.

Syntax $AAS(cr)

$ is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address of the strain gauge input module whose analog

output is to be set.

S is the Start-up Voltage Output Configuration command.

(cr) is the terminating character, carriage return (0Dh).

Response !AA(cr) if the command is valid.

?AA(cr) if an invalid command was issued.

There is no response if the module detects a syntax error or

communication error or if the specified address does not

exist.

! delimiter character indicates a valid command was

received.

? delimiter character indicates the command was invalid.

AA (range 00-FF) represents the 2-character hexadecimal

address of the strain gauge input module.

(cr) is the terminating character, carriage return (0Dh).

NOTICE: A strain gauge input module requires a maximum of 6

milliseconds after it received a Startup Voltage Output

Configuration command to let the settings take effect. During

this interval, the module can not be addressed to perform any

other actions.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 428 429

Comentarios a estos manuales

Sin comentarios

Advantech Data Acquisition Modules ADAM 4000 Manual de usuario Pagina 210

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Advantech Data Acquisition Modules ADAM 4000