Advantech Data Acquisition Modules ADAM 4000 Manual de usuario descargar pdf (Pagina 214)

100

101

5-68

ADAM 4000 Series User’s Manual

4016

$AAB

Name Span Calibration command

Description Stores the voltage output value of the addressed strain

gauge input module as 10V reference.

Syntax $AAB(cr)

$ is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address of the strain gauge input module whose output

channel is to be calibrated.

B is the Span Calibration command.

(cr) is the terminating character, carriage return (0Dh).

Response !AA(cr) if the command is valid.

?AA(cr) if an invalid command was issued.

There is no response if the module detects a syntax error or

communication error or if the specified address does not

exist.

! delimiter character indicates a valid command was

received.

? delimiter character indicates the command was invalid.

AA (range 00-FF) represents the 2-character hexadecimal

address of the strain gauge input module.

(cr) is the terminating character, carriage return (0Dh).

Before issuing the Span Calibration command, the analog

output should be trimmed to the correct value with the

Trim Calibration command. A voltmeter should be

connected to the module’s output channel. (See also the

strain gauge input module’s Trim Calibration command

and Chapter 8, Calibration, for a detailed description.)

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 428 429

Comentarios a estos manuales

Sin comentarios

Advantech Data Acquisition Modules ADAM 4000 Manual de usuario Pagina 214

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Advantech Data Acquisition Modules ADAM 4000