Advantech PCI-1682U Manual de usuario descargar pdf (Pagina 93)

87 PCI-1680U/1682U User Manual

Chapter 4 Software Requirements

4.9 Use Utility to test hardware

An Utility is provided for users to test whether hardware is working normally.

It's installed under C:\Program Files\Advantech\AdvCAN\Utility directory by default.

This Utility can be divided into four parts:

In Part 1, users can select which port to open in the choice box at top.Set "Baud

Rate", "acceptance filter mode", "acceptance code", "acceptance Mask", and choose

if you want to receive "Self Reception" or send "RTR".Users can select "Listen Only"

if you want use listen only mode.can also set "Cycle" of data transfer by entering the

interval time (ms).Users can select "Auto Increase" if you want the data increase

automatically.When setting is finished, users can choose to Open/Close the port,

Start Tx/Stop Tx and Start Rx/Stop Rx.

In Part 2, detail information of received data will be shown when communication is

built.

In Part 3, the following items will be shown:Numbers of sent frames, timeout sent

frames, received frames and timeout received frames.Times of entering PASSIVE

error mode, times of entering BUS OFF mode, times of hardware OVERRUN and

times of software OVERRUN (BOVERRUN) .Users can select ASCII mode. As a

result, ASCII format of the data will be shown in Part 2.

In Part 4, ID, Flag (SFF: Standard Frame; EFF: Extended Frame), length and data of

messages will be configured before being sent.

System Requirements

Windows 2000, 32-bit Windows XP, 32-bit Windows Vista, 32-bit Windows 7, 64-bit

Windows XP, 64-bit Windows Vista, 64-bit Windows 7.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 103 104

Sin comentarios

Advantech PCI-1682U Manual de usuario Pagina 93