Advantech PCI-1682U Manual de usuario descargar pdf (Pagina 86)

PCI-1680U/1682U User Manual 80

4.8.1.2 Receive

Data is received. Values of Baud Rate and timeout of the port can be set.

Please refer to Receive flow chart for function calling.

Before you begin, please enter the name of the port you have installed in combobox

of CAN Port, such as can0, can1, etc. The user can choose either Standard or Cus-

tom to set Baud Rate. If Standard is chosen, you should select the Baud Rate needs

to be set from the dropdown list of Baud Rate.If the user chooses Custom, you

should write values of BTR0 and BTR1 manually in the textbox. The default values of

both are 125k. Type value of timeout in Timeout filed (The default value is 3000

ms).On WDM platform, the user can select either synchronous mode or asynchro-

nous mode. While on CE platform, only synchronous mode is supported.After config-

uring the above items, users can click "Start" button to receive data.

After clicking "Start" button, the name of the button will change into "Stop". At the

same time, results of received frames will be shown in the textbox on the right. Users

can click "Stop" button to stop receiving frames during the process, then the name of

the button will return to "Start" for the next receive operation.

 WDM

 CE

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 103 104

Sin comentarios

Advantech PCI-1682U Manual de usuario Pagina 86