Advantech RSB-4210 Evaluation Kit Manual de usuario descargar pdf (Pagina 52)

RSB-4210 User Manual 44

8. Go to "Device Drivers"'"Real Time Clock", then you can see the "Seiko Instru-

ments S-35390A" on the list. Select this option then exit and save the configura-

tion.

Figure 3.4 Selecting Seiko Instruments S-35390A

9. Go to folder "source/linux-2.6.35.3/arch/arm/mach-mx5", and edit the

"mx53_smd.c", to add these codes.

Figure 3.5 Integrate Code for Seiko Instruments S-35390A

10. Then you can refer to Chapter 3.3.2 to rebuild the kernel with RTC driver (Seiko

Instruments S-35390A).

3.5.2 Changing the Boot Logo

System will show the boot logo when booting up RSB-4210. You can replace the

default boot logo with yours by referring to the following steps:

1. You have to download "netpbm" package firstly, then install it by typing #sudo

apt-get install netpbm .

2. Prepare a picture for boot logo. For example: bootlogo.png (Under folder Desk-

top/bootlogo)

Note! If you cannot find any drivers for your hardware, you should contact your

hardware vendor.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 103 104

Sin comentarios

Advantech RSB-4210 Evaluation Kit Manual de usuario Pagina 52