Advantech RSB-4210 Evaluation Kit Manual de usuario descargar pdf (Pagina 50)

RSB-4210 User Manual 42

3.3.1 Setenv.sh

The script "setenv.sh" is mainly used to configure the developing environment

quickly. It will configure the important folder paths for system, and you can also add/

modify the setenv.sh by yourself if you have added/changed the folder paths.

The default code of setenv.sh is shown as following:

#!/bin/bash

export SRCROOT=${PWD}/..

export CC_PATH=${SRCROOT}/cross_compiler/arm-fsl-linux-gnueabi

export CROSS_COMPILE=$CC_PATH/bin/arm-none-linux-gnueabi-

export ARCH=arm

export KROOT=${SRCROOT}/source/linux-2.6.35.3

export ROOTFS=${SRCROOT}/rootfs

export LOG=${SRCROOT}/Build.log

rm -rf ${LOG}

3.4 Building Instructions

This section will guide you how to build the U-boot - "u-boot.bin" and the Linux kernel

- "uImage".

3.4.1 Building U-boot image "u-boot.bin"

Advantech has written a script to build the "u-boot.bin" quickly. You can build the

image by following these steps:

1. Open "Terminal" utility.

2. Type #sudo su (Change to "root" authority)

3. Type user password

4. Type #cd Desktop/RSB4210_BSP/scripts/

5. Type #. setenv.sh (To configure the developing environment automatically)

6. Type #. cfg_uboot.sh (To set the u-boot.bin configuration automatically)

7. Type #. mk_uboot.sh (Start to build the u-boot.bin)

8. Then you can see "u-boot.bin" under folders "image" and "mk_inand"

9. Finish.

3.4.2 Building Linux Kernel image "uImage"

Advantech has written a script to build the "uImage" quickly. You can build the image

by referring to the following steps:

1. Open "Terminal" utility.

2. Type #sudo su (Change to "root" authority)

3. Type user password

Note! You have to run "setenv.sh" once you open a new "Terminal" utility

every time.

Note! It is suggested to change to "root" authority to use the source code.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 103 104

Sin comentarios

Advantech RSB-4210 Evaluation Kit Manual de usuario Pagina 50