
Chapter 3: Installation and Configuration 27
Figure 3-8: Port Configuration Window
3.2.3 Port Configuration
further efforts.
Duplex Mode
The utility will detect the current transmission mode (half-
duplex or full-duplex) on the network segment, and set the
transmission mode for the device accordingly without your
further efforts.
IP address, Subnet Mask, Default Gateway
The IP address identifies your ADAM-4570 device on the
global network. Each ADAM-4570 has same default IP
address 10.0.0.1. Obtain a specific IP address from your
network administrator and then configure each ADAM-4570
with the individual IP address.
Note: The ADAM-4570 does not support auto IP address
configured by DHCP server.
Comentarios a estos manuales