
18 ADAM-4570 User’s Manual
2.2.3 Power Connection
You should take the following steps to connect ADAM-4570
power.
1.Connect the power cable to 2-pin connector
2.Connect power cable to power adapter
If the ADAM-4570 is working properly, the green power
LED will light up , indicating that the ADAM-4570 is receiving
power. Furthermore, the ADAM-4570 provides surge protec-
tion to protect it from being damaged by over-voltage, a 34V
surge protection is added to the power end and an 18V surge
protection is for the RS-422/485 end.
Figure 2-8: Power Connection
Comentarios a estos manuales