Advantech ADAM-4570S Manual de usuario descargar pdf (Pagina 30)

22 ADAM-4570 User’s Manual

3.1 Driver and Utility Installation

In order to use a PC via an Ethernet network to control serial

devices connected to the ADAM-4570, you must first have a

host running Windows™NT4.0 or Windows 2000. This type

of application also requires the host to have an Ethernet card

and TCP/IP protocol installed. Following are the installation

instructions to set up the ADAM-4570.

1. Insert the ADAM-4570 Driver/Port Mapping utility

diskette into the floppy drive (e.g. A:\) on the host PC.

Change the host computer’s default drive from C: to A:

2. Use your Windows Explorer or the Windows Run

command to execute the Setup program (the path for the

Setup program on the diskette should be A:\setup.exe, if

your default floppy drive is A:).

3. The Setup program will specify a default installation path,

C:\Program Files\Advantech\ADAM4570. If a new

Figure3-1: Setup Configuration Utility

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Sin comentarios

Advantech ADAM-4570S Manual de usuario Pagina 30