Advantech AIMB-766 Manual de usuario descargar pdf (Pagina 18)

IPC-630 User Manual 10

2.4 Hold-down Clamp

The hold-down clamp protects all the cards from vibration and shock. After inserting

all the cards, re-fasten the hold-down clamp according to the following steps.

1. There are two rows of notches on both sides of the hold-down clamp for insert-

ing into rubber cushions provided in the accessory. One side is for PCI cards,

while the other side is for ISA cards. Depending on the card height, the cushions

can be inserted upward or downward. After the rubber cushions have been

inserted into the notches, they will stabilize the add-on cards to protect them

from shock and vibration. (see Figure 2.6)

2. Put the hold-down clamp back into its original position. Please note that the cir-

cle hole on the hold-down clamp faces left rear. (See Figure 2.7).

3. Secure the hold down clamp to the chassis with the two screws.

Figure 2.6 Installing hold-down clamp and rubber cushions

Figure 2.7 The circular hole on the hold-down clamp

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Sin comentarios

Advantech AIMB-766 Manual de usuario Pagina 18