Advantech PCI-1240 Manual de usuario descargar pdf (Pagina 20)

PCI-1240/PCI-1240U User Manual 12

2.3 Hardware Installation

After the DLL driver installation is completed, you can now go on to

install the PCI-1240/PCI-1240U card in any PCI slot on your computer.

But it is s

uggested that you should refer to the computer user manual or related

documentations if you have any doubt. Please follow the steps below to

install the card on your system.

Step 1: Turn off your computer and unplug the power cord and cables.

Step 2: Remove the cover of your computer.

Step 3: Remove the slot cover on the back panel of your computer.

Step 4: Touch the metal part on the surface of your computer to neutralize

the static electricity that might be on your body.

Step 5: Insert the PCI-1240/PCI-1240U card into a PCI slot. Hold the

card only by its edges and carefully align it with the slot. Insert

the card firmly into place. Use of excessive force must be

avoided, otherwise the card might be damaged.

Step 6: Fasten the bracket of the PCI card on the back panel rail of the

computer with screws.

Step 7: Connect appropriate accessories (100-pin cable, wiring terminals,

etc. if necessary) to the PCI card.

Step 8: Replace the cover of your computer chassis. Re-connect the

cables you removed in step 2.

Step 9: Plug in the power cord and turn on the computer.

Note Make sure you have installed the driver first

before you install the card (please refer to 2.2

Driver Installation)

TURN OFF your computer before installing or

removing any components on the computer.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

Sin comentarios

Advantech PCI-1240 Manual de usuario Pagina 20