Advantech PCI-1706U Manual de usuario descargar pdf (Pagina 28)

PCI-1706U User Manual 22

3.1 Overview:

Maintaining signal connections is one of the most important factors in ensuring that

your application system is sending and receiving data correctly.A good signal con-

nection can avoid unnecessary and costly damage to your PC and other hardware

devices. This chapter provides useful information about how to connect input and

output signals to the PCI-1706U cards via the I/O connector.

3.2 Switch and Jumper Settings

Figure 3.1 Connector and Switch Locations

1. Jumper Settings

There is no Jumpers in PCI-1706U.

2. Setting the BoardID Switch (SW1)

The PCI-1706U has a built-in DIP switch (SW1), which is used to define each

card's board ID. You can determine the board ID on the register as shown in

Table 2.1. When there are multiple cards on the same chassis, this board ID set-

ting function is useful for identifying each card's device number through board

ID. We set the PCI-1706U board ID as 0 at the factory. If you need to adjust it to

other board ID, set the SW1 by referring to DIP switch setting.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Sin comentarios

Advantech PCI-1706U Manual de usuario Pagina 28