Advantech TREK-668 Manual de usuario descargar pdf (Pagina 52)

TREK-668/303 User Manual 40

6.3.4 TREK-668 Power Consumption

OS: Windows Embedded Standard; Test program: Burn-in test V6.0

6.4 Digital IO Test

1. To execute the I/O Test, connect DIO loopback, click Pin0, connect the end

which reads the signal, the bulb should light up, like wise to Pin1~Pin3. Next

check the Digital output box to execute the same procedure. See figure 6.

Figure 6.11 DI/O test

Item Test Condition Test Case Result

Full Loading

Run BURN-IN 6.0

DC Input current (24V) 1.30 A

Total Power (W) 32.4 W

2 Windows Idle

DC Input current (24V) 1.15 A

Total Power (W) 27.6 W

3 Instant boot

DC Input current (24V) 1.15

Total Power (W) 27.6 W

Windows Idle

(Enable Heater)

DC Input current (24V) 1.80A

Total Power (mW) 43.2 W

5 TREK S5

DC Input current (12V) 2.53 mA

Total Power (mW) 30.36 mW

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 74 75

Sin comentarios

Advantech TREK-668 Manual de usuario Pagina 52