Advantech TREK-668 Manual de usuario descargar pdf (Pagina 19)

7 TREK-668/303 User Manual

Chapter 2 System Setup

Figure 2.5 Top view of TREK-668

2.2 Installation Procedures

2.2.1 Connecting the Power Cord

Connect the three pin waterproof power cord to the DC inlet of the In-Vehicle Com-

puting Box. On the open-wire end, one pin is reserved for positive voltage and is

marked, "+"; one pin is reserved for ground and is marked, "-"; and, one pin is

reserved for the ignition signal with an "ignition" mark.

Note! Ignition on/off setting: The TREK-668 supports an ignition on/off function

so that you can power on/off the TREK-668 via the ignition signal/volt-

age and connect the TREK- vehicle ignition switch.

Table 2.1: Pin Definition of Power Cord

Pin Definition Color

1+Red

2- Black

3 Ignition Orange

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 74 75

Sin comentarios

Advantech TREK-668 Manual de usuario Pagina 19