Advantech UNO-2178A Manual de usuario descargar pdf (Pagina 31)

23 Chapter 3

3.3 Connecting Power

Connect the UNO-2174A/2178A to a 9~36 VDC power source. The

power source can either be from a power adapter or an in-house power

source.

3.4 Installing a Hard Disk

The procedure for installing a hard disk into the UNO-2174A/2178A is

below. Please follow these steps carefully. Please note the system is not

compatible with +12V HDD. Please use an HDD with lower power input.

1. Remove the power cord.

2. Unscrew the six screws from the bottom panel.

3. Install the HDD on the HDD bracket.

4. Connect the SATA signal cable to CN33 and connect SATA power

cable to CN34, then connect the other side of the cable to the

SATA hard disk.

5. Screw back the bottom panel with the six screws.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Sin comentarios

Advantech UNO-2178A Manual de usuario Pagina 31