
PCM-3353 User Manual 22
Max. Power Saving Maximum power management., Suspend Mode =
1 min., and HDD Power Down = 1 min.
User Defined (Default) Allows you to set each mode individually. When not
disabled, each of the ranges are from 1 min. to 1 hr. except for HDD Power
Down which ranges from 1 min. to 15 min. and disable.
Modem Use IRQ
This determines the IRQ which the MODEM can use. The choices: 3, 4, 5, 7, 9,
10, 11, NA.
Power-On by Alarm [Disabled]
This item allows users to power on the system at a specified date and time.
Disabled Disables this function.
Enabled Enables alarm function to power on system Day (of the
month) Alarm 1-31 Time (HH:MM:SS) Alarm (0-23):
(0-59): 0-59)
IRQ Wakeup Events [Press Enter]
This item allows user to control wakeup from an IRQ event.
3.8 PnP/PCI Configurations
Figure 3.7 PnP/PCI configurations screen
PnP OS Installed
Select Yes if you are using a plug and play capable operating system. Select No
if you need the BIOS to configure non-boot device.
Init Display First [Onboard]
This item allows user to change boot display sequence.
PNP OS Installed [No]
Usually best set to No. Some rare cases may need to set to Yes.
Reset Configuration Data [Disabled]
This item allows user to clear any PnP configuration data stored in the BIOS.
Comentarios a estos manuales