Advantech PCM-3353 Manual de usuario descargar pdf (Pagina 27)

19 PCM-3353 User Manual

Chapter 3 Award BIOS Setup

 Memory Hole At 15 M-16 M [Disabled]

This item reserves 15 MB-16 MB memory address space to ISA expansion

cards that specifically require the setting. Memory from 15 MB-16 MB will be

unavailable to the system because only expansion cards can access memory in

this area.

 Overcurrent Reporting [Disabled]

This item enables or disables USB overcurrent reporting function. Suggest leav-

ing on default setting (Disabled).

 Port 4 assignment [Host]

This item allows user to change mode of USB port 4. The selections are "Host",

"Device”, or “Not Used”.

3.6 Integrated Peripherals

Figure 3.5 Integrated peripherals screen

 IDE Master/Slave PIO/UDMA Mode,

IDE Master/Slave PIO/UDMA Mode (Auto) has a master and a slave, making

two IDE devices possible. Because each IDE device may have a different Mode

timing (0, 1, 2, 3, 4), it is necessary for these to be independent. The default set-

ting “Auto” will allow auto detection to ensure optimal performance.

 Master Drive PIO Mode [Auto]

This item allows user to adjust master IDE mode of type for modification pur-

pose. Suggested BIOS default value is "Auto".

 Slave Drive PIO Mode [Auto]

This item allows user to adjust slave IDE mode of type for modification purpose.

Suggested BIOS default value is "Auto".

 IDE Primary Master UDMA [Auto]

This item allows user to adjust primary master IDE mode of type for modification

purpose. Suggested BIOS default value is "Auto".

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 69 70

Sin comentarios

Advantech PCM-3353 Manual de usuario Pagina 27