Advantech PCA-6012 Manual de usuario descargar pdf (Pagina 45)

35 PCA-6012 User Manual

Chapter 3 AMI BIOS Setup

3.5 PCI/PNP Setup

Select the PCI/PnP tab from the PCA-6012 setup screen to enter the Plug and Play

BIOS Setup screen. Highlighting a Plug and Play BIOS Setup option by using the

<Arrow> keys displays a description in the right-hand panel. All Plug and Play BIOS

Setup options are described in this section. The Plug and Play BIOS Setup screen is

shown below.

Figure 3.11 PCI/PNP Setup

 Clear NVRAM

Set this value to force the BIOS to clear the Non-Volatile Random Access Mem-

ory (NVRAM). The Optimal and Fail-Safe default setting is No.

 Plug and Play O/S

Set this value to allow the system to modify the settings for Plug and Play oper-

ating system support. The Optimal and Fail-Safe default setting is No.

 PCI Latency Timer

Use this to adjust the PCI Latency Timer. This option sets the latency of all PCI

devices on the PCI bus. The Optimal and Fail-Safe default setting is 64.

 Allocate IRQ to PCI VGA

Set this value to allow or stop the system from giving the VGA adapter card an

interrupt address. The Optimal and Fail-Safe default setting is Yes.

 Palette Snooping

Set this value to allow the system to modify the Palette Snooping settings. The

Optimal and Fail-Safe default setting is Enabled.

 PCI IDE BusMaster

Set this value to allow or prevent the use of PCI IDE Busmastering. The Opti-

mal and Fail-Safe default setting is enabled.

 Off Board PCI/ISA IDE card

Set this value to allow an add-on PCI/ISA IDE card to be selected. The Optimal

and Fail-Safe default setting is Auto.

 IRQ

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Sin comentarios

Advantech PCA-6012 Manual de usuario Pagina 45