Advantech EKI-6538 Manual de usuario descargar pdf (Pagina 42)

EKI-6538 User Manual 34

Click on the number to configure the port. Press “Apply” to save you

configuration before leave this page.

Admin

Enable: Transmit and receive packets

Disable: Reject packets transmission and reception (LED indicators

would be lit always if you do not remove the cable even though you dis-

able this function)

Auto Negotiation

Enable: Speed and Duplex are auto-negotiated by the connecting devices

Disable: Speed and Duplex must be set by manual.

Speed Duplex

Set the same speed/duplex in the network area, or the communication

may have problems.

Flow Control

Enable: When the flow is over loading, system would send out a frame to

suspend the data transmission. That will control the flow effectively with-

out packet loss

Disable: No flow control and might cause packet loss while over loading.

Default Priority

Set up the priority of the packet from this port (0~7)

Default Port VID

Add 802.1Q VLAN tag to the ingress packet without 802.1Q VLAN tag.

If the packet ingress to this port without default VLAN tag, EKI-6538

will add the VID tag to this packet as you set here.

This tag not only include the 802.1Q VLAN ID, the priority information

were included also.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

Sin comentarios

Advantech EKI-6538 Manual de usuario Pagina 42