Advantech PCM-9363 Manual de usuario descargar pdf (Pagina 34)

PCM-9363 User Manual 24

3.2.2.2 IDE Configuration

Figure 3.5 IDE Configuration

! ATA/IDE Configuration

This item allows you to select Disabled / Compatible / Enhanced.

! Legacy IDE Channels

When set to Enhanced mode you can select IDE or AHCI mode. When select

Compatible mode you can select SATA only; SATA pri, PATA sec; or PATA only.

! Primary/Secondary/Third IDE Master/Slave

BIOS auto detects the presence of IDE device, and displays the status of auto

detection of IDE device.

– Type: Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD]

– LBA/Large Mode: Enables or Disables the LBA mode.

– Block (Multi-Sector Transfer): Enables or disables data multi-sectors trans-

fers.

– PIO Mode: Select the PIO mode.

– DMA Mode: Select the DMA mode.

– S.M.A.R.T.: Select the smart monitoring, analysis, and reporting technology.

– 32Bit Data Transfer: Enables or disables 32-bit data transfer.

! Hard Disk Write Protect

Disable/Enable device write protection. This will be effective only if the device is

accessed through BIOS.

! IDE Detect Time Out (Sec)

This item allows you to select the time out value for detecting ATA/ATAPI

device(s).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 97 98

DarrickBuili 20 Feb 2024 | 21:26:55

Hello Guys, Glad to Join! :)

Advantech PCM-9363 Manual de usuario Pagina 34