
7 Chapter 2
2.2 Video Input Connection (Camera)
Please connect camera to the unit over the video input connector. The unit
provides four BNC connectors. The camera installation procedures are as
follows:
1. Connect the video signal line: Connect the video signal line to the
unit.
2. Connect the camera power line: Connect the camera’s adaptor to
the camera, and plug in the adaptor.
The complete connection with a camera is as shown below.
Figure 2.2: Video input connection
BNC connection
S-video connection
or
Camera
power line
AC/DC adaptor
Power outlet
Comentarios a estos manuales