Advantech PCA-6190 Manual de usuario descargar pdf (Pagina 19)

11 ACP-4320 User Manual

Chapter 2 System Setup

2.5 Installing Disk Drives

The ACP-4320 comes with two front-accessible SAS/SATA HDD trays; it also sup-

ports two 5.25" disk drives and one 3.5"flppy disk drive or an internal SATA/ATA hard

disk drive.

Figure 2.6 Installing the drives

2.5.1 Installing a 5.25" disk drive

1. Remove the two screws, which mount the FDD bracket to the drive bay unit.

2. Remove the four screws, which mount the drive bay to the chassis, then take

out the drive bay.

3. Remove the front cover of one 5.25" drive bay. Insert one 5.25" disk drive (e.g.,

5.25" CD-ROM/-RW) into the proper location in the drive bay and fix it with four

screws.

Note! For the first time installing all disk drives together into the ACP-4320

chassis, we suggest users install the two 5.25" disk drives (refer to Sec-

tion 2.5.1) first, then the 3.5" floppy disk drive (refer to Section 2.5.2) or

internal 3.5" hard disk drive (refer to Section 2.5.3), and finally, the dual

SAS/SATA hard disk drives into the front-accessible SAS/SATA HDD

trays (refer to Section 2.5.4).

Note! The ACP-4320's dual, front-accessible SAS/SATA HDD trays do not

support the hot swap feature. User can install a SAS/SATA RAID card

for the RAID application, but the SAS/SATA HDD LEDs won't function

when the HDD fails, or when rebuilding the data, because it wasn't

designed for the specific SAS/SATA RAID card. However users can still

monitor status via the GUI application provided by the RAID card ven-

dor.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

Sin comentarios

Advantech PCA-6190 Manual de usuario Pagina 19