Advantech EKI-6311G Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
21
3.1 Wireless Client Bridge-to-Central Wireless Bridge
Figure 3-2
Refer to Figure 3-2 for the following setup.
Note:
The EKI-6311G AP is the Central Wireless Bridge and EKI-6311G CB is the
Wireless Client Bridge
Step 1 Set the EKI-6311G AP to perform a bridge (bridge IP address:
192.168.1.1).
Step 2 Set Wireless parameters on the AP to: Channel (1) and SSID
(wireless)
Step 3 Set the EKI-6311G CB to function in the bridge mode (bridge IP address:
192.168.1.241).
Step 4 Set Wireless parameters on the EKI-6311G CB to: Channel (1) and
SSID (wireless), and these parameters must be the same with COU.
Step 5 Left side subnet is transparent to the right side.
Step 6 DHCP server assign IP address to PC1 and PC2
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Comentarios a estos manuales

Sin comentarios