Advantech EKI-1322 Manual de usuario descargar pdf (Pagina 51)

45 EKI-1321/1322 User Manual

Chapter 5 Web Configuration

5.7 Ethernet Configuration

5.7.1 Eth1 Configuration

Eth1 page is where you assign the EKI-132x IP address, netmask, Gateway and

other parameters for the Ethernet interface.

Mode (default=Static): You can choose from four possible IP configuration modes.

IP Address (default=10.0.0.1): Enter the IP address that will be assigned to your

EKI-132x. All ports on the EKI-132x will share this IP address. An IP address is a

number assigned to a network device (such as a computer) as a permanent address

on the network. Computers use the IP address to identify and talk to each other over

the network. Choose a proper IP address that is unique and valid for your network

environment.

Subnet mask (default=255.0.0.0): Enter the subnet mask. A subnet mask represents

all of the network hosts at one geographic location, in one building, or on the same

local area network. When a packet is sent out over the network, the KI-132x will use

the subnet mask to check whether the desired TCP/IP host specified in the packet is

on the local network segment. If the address is on the same network segment as the

EKI-132x, a connection is established directly from the EKI-132x. Otherwise, the con-

nection is established through the given default gateway.

Option Description

Static IP User defined IP address, Subnet Mask, and Default Gateway.

DHCP/Auto-IP DHCP Server assigned IP address, Subnet Mask, Default Gate-

way, and DNS.

BOOTP/Auto-IP BOOTP Server assigned IP address.

DHCP/BOOTP/Auto-IP DHCP Server assigned IP address, Subnet Mask, Default Gate-

way, and DNS, or BOOTP Server assigned IP address. (If the

DHCP Server does not respond)

MAC Address 6 bytes MAC address

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Sin comentarios

Advantech EKI-1322 Manual de usuario Pagina 51