
PPC-L126 User Manual 80
Chapter 9 Award BIOS Setup
The PPC-L126 comes with an Award BIOS chip that contains the ROM
setup for your system. This chip serves as an interface between the pro-
cessor and the rest of the mainboard's components. This chapter explains
the information shown in the setup program and tells you how to modify
the settings according to your system configuration. Some items are not
explained, because it is recommended that users don’t change them.
9.1 System test and initialization
These routines test and initialize board hardware. If the routines encoun-
ter an error during the tests, you will either hear a few short beeps or see
an error message on the screen. There are two kinds of errors: fatal and
non-fatal. The system can usually continue the booting with non-fatal
errors. Non-fatal errors are usually shown with the following instructions:
press <F1> to RESUME
Write down the message and press the F1 key to continue booting.
9.1.1 System configuration verification
These routines check the current system configuration against the values
stored in the board’s CMOS memory. If they do not match, the program
outputs an error message. You will then need to run the BIOS setup pro-
gram to set the configuration information in memory.
The CMOS settings need changing in the following situations:
1. You are starting your system for the first time
2. You have changed the hardware attached to your system
3. The CMOS memory has lost power and the configuration informa-
tion has been erased.
The PPC-L126 CMOS memory has an integral lithium battery backup.
The battery backup should last ten years in normal service, but when it
finally runs down, you will need to replace the complete unit.
Note: Values for the various setup items that appear on
your screen (including default values) may not be the
same as those shown in this chapter. This is because
the BIOS is revised and updated from time to time. If
in doubt, check Advantech's website for the latest
BIOS versions and related information.
Comentarios a estos manuales