
10-14
Features
Industrial Communication
Specifications
General
Bus Type Universal PCI V 2.2
Certifications CE, FCC class A
Connectors PCI-1610UP: 1 x Female DB44
PCI-1602UP and PCI-1604UP: 1 x Female DB25
Dimensions 119.91 x 64.41 mm (4.7” x 2.5”) (Low profile MD1)
Power Consumption 5 V @ 400 mA (Max.)
Power Requirement 5 V
Communications
Communication PCI-1602UP, PCI-1604UP: 16PCI952
Controller PCI-1610UP: 16PCI954
Data Bits 5, 6, 7, 8
Data Signals RS-232: TxD,RxD,RTS, CTS, DTR, DSR, DCD, GND, RI
RS-422: Tx+,Tx-,Rx+,Rx-,RTS+,RTS-,CTS+,CTS-, GND
RS-485: Data+, Data-, GND
FIFO 128 bytes
Flow Control CTS/RTS, Xon/Xoff
IRQ Assigned by Plug & Play
Parity None, even, odd
Speed 50 bps ~ 921.6 kbps
Stop Bits 1, 1.5, 2
PCI-1602UP
PCI-1604UP
PCI-1610UP/AUP
2-port RS-422/485 Low-Profile PCI Communication
Card, w/Isolation and Surge Protection
2-port RS-232 Low-Profile PCI Communication
Card, w/Surge Protection
4-port RS-232 Low-Profile Universal PCI
Communication Card, w/Surge Protection
PCI bus specification 2.2 compliant
Speeds up to 921.6 kbps
2-port RS-232(PCI-1604UP); 2-port RS-422/485 (PCI-1602UP);
4-port RS-232 (PCI-1610UP)
I/O address automatically assigned by PCI Plug & Play
OS support: Windows
®
98/ME/2000/XP, XP Embedded Linux
®
2,500V
DC
Surge protection
2,500V
DC
Isolation protection for RS-422/485 (PCI-1602UP)
Interrupt status register for increased performance
Space reserved for termination resistors (PCI-1602UP)
Automatic RS-485 data flow control (PCI-1602UP)
Powerful and easy-to-use utility (ICOM Tools)
Universal and Low-profile PCI (Supports 3.3 V or 5 V PCI bus signal)
Protection
ESD Protection 16 kV
Isolation Protection 2,500 V
DC
(PCI-1602UP)
Surge Protection 2,500 V
DC
(PCI-1602UP, PCI-1604UP, PCI-1610UP)
Software
Bundled Software ICOM Tools
Driver Support Windows 98/ME/2000/XP/XP Embedded, Linux
Environment
Humidity (Operating) 5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)
Operating Temperature 0 ~ 65° C (refer to IEC 68-2-1, 2) (32 ~ 149° F)
Storage Temperature -25 ~ 85° C (-13 ~ 185° F)
Ordering Information
PCI-1602UP 2-port RS-422/485 Low-Profile Universal PCI COMM
Card, w/Isolation and Surge Protection
(30 cm DB25 to 2DB9 cable included)
PCI-1604UP 2-port RS-232 Low-Profile Universal PCI COMM Card,
w/Surge Protection
(30 cm DB25 to 2DB9 cable included)
PCI-1610UP 4-port RS-232 Low-Profile Universal PCI COMM Card,
w/surge protection
(30 cm DB44 to 4DB9 cable included)
PCI-1610AUP 4-port RS-232 Low-Profile Universal PCI COMM Card,
(30cm DB44 to 4 DB9 cable included)
Introduction
These RS-232/422/485 PCI communication cards are compatible with the PCI 2.2 bus specification for universal connectivity and low profile PCI cards. PCI-1604UP provides two
independent RS-232 ports, while PCI-1602UP has two RS-422/485 ports. PCI-1610UP and PCI-1610AUP provide 4 RS-232 ports.To improve system performance, all cards allow
transmission rates up to 921.6 kbps. To increase reliability, the cards offer surge protection, protecting your system from abrupt high voltages up to 2,500 V
DC
. High-performance
16PCI952 and 16PCI954 UARTs with 128-byte FIFO, reduces the CPU load, making the cards especially suitable for multitasking environments.
The cards follow the Low Profile PCI MD1 standard. This standard has the same protocol and electronic definition as standard PCI, but the Low Profile PCI standard is smaller. Thus,
the cards are suitable for embedded systems, and size-constrained environments. Moreover, all cards are equipped with an universal PCI connector, which allows support for traditional
systems with 5 V signaling or newer systems with 3.3 V signaling.
Advantech also provides a convenient utility called ICOM Tools, to help test the PCI card’s performance by analyzing the port status. The menu commands and toolbar buttons of
ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communication data and monitor the signal status. ICOM Tools can be used with all series
of Advantech ICOM cards.
PCI-1604UP
PCI-1602UP
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Comentarios a estos manuales