Advantech FWA-3140 Especificaciones descargar pdf (Pagina 14)

FWA-3140 User Manual --- Page 8

Two PCI slotTwo PCI slot

3.5” HDD Space

Power supply Two 15-CFM

cooling fan

3.5” HDD Space

Power supply Two 15-CFM

cooling fan

Figure 2-3: Top view of FWA-3140

2.2 Installing Central Processing Unit (CPU)

1. Locate the 478-pin CPU ZIF socket on the motherboard. And pull the Socket

actuation lever to the 90-degree directly.

2. Position the CPU above the socket that its marked corner (golden cut edge on

the CPU upper corner) matches the base of the socket lever. Insert the CPU into

the socket. (Do not force the CPU into the socket.) Then push down the socket

lever to secure the CPU.

3. Apply the thermal tape to provide better heat conduction between your CPU and

cooling fan. Position the cooling fan on top of the CPU. Align and snap the four

hooks of the retention mechanism to the holes on each corner of the module

base.

4. Make sure the CPU fan power connector is plugged to the motherboard fan

power connector, than installing CPU is completed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Sin comentarios

Advantech FWA-3140 Especificaciones Pagina 14