Advantech MIC-3358 Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
7 Chapter 1
1.4.2 Clear CMOS (JP4)
This jumper is used to erase CMOS data and reset system BIOS informa-
tion. Follow the procedures below to clear the CMOS.
1. Turn off the system.
2. Close jumper JP4 (1-2) for about 3 seconds.
3. Set jumper JP4 (2-3) as normal.
4. Turn on the system. The BIOS is reset to its default setting.
Table 1.2: JP1 jumper definition
5V
3.3V (Default)
Table 1.3: JP2 jumper definitions
VGA output in Rear IO
VGA output in front panel of MIC-3358
Table 1.4: JP7 jumper definitions
Master
Slave (default)
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Comentarios a estos manuales

Sin comentarios