Advantech TPC-68 Series Manual de usuario descargar pdf (Pagina 17)

Chapter 1 General Information 7

1.7 Mounting

1.7.1 Panel mounting

1. There is a piece of adhesive waterproof gasket on the Mg-Al front

bezel. Make sure the waterproof gasket is in position before install the

TPC-1560 to the panel opening.

2. Install the TPC-1560 to the panel opening.

3. Find out the ten clampers and ten long screws in the accessory pack.

Hook those clampers to those holes around the four sides of the bezel.

Insert the screws to every clamper and fasten them. These screws will

then push on the mounting panel and fix the unit.

4. The mounting panel thickness is suggested to be less than 6mm

(0.236 inch).

Figure 1.7-1 Panel mounting

Figure 1.6-1 I/O ports arrangement

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Sin comentarios

Advantech TPC-68 Series Manual de usuario Pagina 17