Advantech DLoG MTC 6 Series Manual de usuario Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 97
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
Mounting
60 User’s Manual V2.00 MTC 6 Series
7.4.2. Position of the MTC 6 in the vehicle
In the vehicle, the driver's field of view must be kept free.
If a keyboard and scanner should be installed on the MTC 6, please plan sufficient
space.
No part of the MTC 6 system may project beyond the vehicle.
Figure 7.2: Position of the MTC 6 on a forklift
7.4.3. Overview assembly steps
Before fastening the MTC 6 to the vehicle:
the shutdown automation must be configured
the forklift must be prepared (connection to ignition, correct voltage, etc.)
We recommend the following installation sequence:
Step 1: Fasten the bracket to the vehicle
Step 2: Install MTC 6 to the bracket
The MTC 6 may not project
outside the vehicle!
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 96 97

Comentarios a estos manuales

Sin comentarios