
7 Chapter 1
1.7 Panel Mounting
1. There is a piece of adhesive waterproof gasket on the AL front
bezel. Make sure the waterproof gasket is in position before
installing the TPC-1770/1780 to the panel opening.
2. Install the TPC-1770/1780 to the panel opening.
3. Find out the ten clampers and ten long screws in the accessory
pack. Hook those clampers to those holes around the four sides
of the bezel. Insert the screws to every clamper and fasten them.
These screws will then push on the mounting panel and fix the
unit.
4. The mounting panel thickness is suggested to be less than 5.5mm
(0.216 inch).
Figure 1.2: Panel Mounting
Comentarios a estos manuales