
Chapter 2 Installation 33
2.22 Ethernet configuration
The PCM-9550F/FM/L is equipped with a high performance 32-bit
PCI-bus Ethernet interface which is fully compliant with IEEE
802.3U 10/100Mbps CSMA/CD standards. It is supported by all
major network operating systems.
The medium type can be configured via the RSET8139.EXE
program included on the utility disk. (See Chapter 3 for detailed
information.)
2.22.1 100Base-T connector (CN16)
10/100Base-T connects to the PCM-9550F/FM/L via an adapter
cable to a 10-pin polarized header (CN6).
2.22.2 Network boot
The Network Boot feature can be utilized by incorporating the
Boot ROM image files for the appropriate network operating
system. The Boot ROM BIOS files are included in the system
BIOS, which is on the utility CD disc.
2.22.3 LAN controller power select (J6)
Table 2-11: LAN controller power select (J6)
3.3 V* Standby 3.3 V
* default setting
Note: PCM-9550F/FM/L supports Wake-on-LAN. For
Wake-on LAN, J6 has to be set to the Standby
3.3 V (2-3) position
1 1
Comentarios a estos manuales