
- 19 -
2.4 Drive Bay Installation
The ACP-2000 standard drive bay can hold one slim-type CD-ROM, and two 3.5" bay or 5.25"
bay & one 3.5" bay.
Installation disk drives
(1) Remove the Top Front Cover
(2) Undo the six screws fixing the Standard Drive Bay.
(3) Lift off the Standard Drive Bay. See Figure 2.9
(4) Insert the drives into their proper locations in the drive bay, and secure with the
provided screws.
(5) Connect the disk drive power and signal cables.
Fig 2-9 Drive Bay Installation
Comentarios a estos manuales